NEM652 DCC Mobile Decoders, H0 Scale, LaisDcc Brand, PanGu Series, 860021

Please read this before placing an order

You need to connect a 1K(1000ohm) 1/4Watt or 1.5K(1500ohm) 1/8 Wattother valuein series resistor when you use the function wires with LED to limit the LED current.

(Attention) DCC voltage. Please make sure your DCC voltages are below 16V. We
Recommends track voltage at 12V. Read below to understand everything about DC voltage. Above
Voltage can cause irreparable damage to the decoder. We don't accept dispute if your voltage is over 16V and burn the decoders. If your track voltage cannot lower to 16V, please do not order our decoders.

http://www.sumidacrossing.org/ModelTrains/ModelTrainDCC/DCCDecoders/DCCVoltages/

860021 does not support stay alive kits. If you need to stay alive, please order 870021.