21 Pin Mobile Dcc Decoders with 6 Functions, HO Scale, 860019, LaisDcc Brand, Pangu Series
21 Pin Mobile Dcc Decoders with 6 Functions, HO Scale, 860019, LaisDcc Brand, Pangu Series
Couldn't load pickup availability
Please read this before placing an order
You need to connect a 1K(1000ohm) 1/4Watt or 1.5K(1500ohm) 1/8 Wattother valuein series resistor when you use the function wires with LED to limit the LED current.
(Attention) DCC voltage. Please make sure your DCC voltages are below 16V. We
Recommends track voltage at 12V. Read below to understand everything about DC voltage. Above
Voltage can cause irreparable damage to the decoder. We don't accept dispute if your voltage is over 16V and burn the decoders. If your track voltage cannot lower to 16V, please do not order our decoders.
http://www.sumidacrossing.org/ModelTrains/ModelTrainDCC/DCCDecoders/DCCVoltages/
Function warning F3, F4
All functions of this decoder are full voltage output now. You can directly use it to drive LEDs now. Please also connect a 1K or larger resistor in series to limit the LED current.
Current ranking:
2 Amp peak power, 1A continuous in all, Each functions maximum 100mA.
Loco Scale: Good for HO&N scale
Model and order number: 860019
Function:
DCC decoders for locomotives with 21MTC interface
Dimensions: 18mm*16mm*3mm
