KungFu Series H0 Scale Mobile Decoder, Stay Alive Support Kits, 870012

Please read this before placing an order

You need to connect a 1K(1000ohm) 1/4Watt or 1.5K(1500ohm) 1/8 Wattother valuein series resistor when you use the function wires with LED to limit the LED current.

(Caution) DCC voltages. Please make sure your DCC voltages are below 16V. We
Recommends track voltage at 12V. Read below to understand everything about DC voltage. Above
Voltage can cause irreparable damage to the decoder. We don't accept dispute if your voltage is over 16V and burn the decoders. If your track voltage cannot be lowered to 16V, please do not order our decoders.

http://www.sumidacrossing.org/ModelTrains/ModelTrainDCC/DCCDecoders/DCCVoltages/

Dcc decoders 870012

With NEM651 6 wires + blue wire and black wire for connecting Stay Alive kits